The Yamaha Stage Custom 5pc Drum Set is available in 2 size configurations (diameter x depth):


This SBP2F50 is the "5 piece with 22 inch Kick" and the SBP0F50 is the "5 piece with 20 inch Kick"


22" x 17" Kick
10" x 7" Rack Tom
12" x 8" Rack Tom
16" x 15" Floor Tom
14" x 5.5" Snare


20" x 17" Kick
10" x 7" Rack Tom
12" x 8" Rack Tom
14" x 13" Floor Tom
14" x 5.5" Snare


Yamaha Stage Custom 22/10/12/16/14sn 5pc Drum Set

These 100% Birch Stage Custom Drum Sets from Yamaha are some of the most dependable, best sounding kits around since their introduction in 1995. We love them so much that we use them in our lesson rooms. They sound absolutely massive, so much so that one smack of the bass drum is often all it takes for drummers in our store to want one. As we've come to expect from Yamaha, each kit arrives consistently flawless and ready for a lifetime of looking and sounding great. Available in a 22" or 20" bass drum shell pack. These kits are highly recommended!

Yamaha Stage Custom in Honey Amber

cymbals and hardware sold seperately



100% Birch Shell

The shell is a key factor in a drum's ability to "rumble," or resonate. Accordingly, the Stage Custom employs 100% birch - a classic in the realm of high-class drum kits. Moreover, with its six-ply structure the Stage Custom accurately conveys the vibrations produced at the impact surface, achieving performance that overwhelms anything in its class.


Yamaha Enhanced Sustain System - YESS

The secret of the YESS system is two-fold: First, it provides minimum contact of hardware with shell; second, it connects that hardware at the nodal point* of the drum - the point at which it will not interfere with shell vibration. Nylon bushings on rod clamps afford maximum stability. The YESS system permits toms to be placed close together, and does not interfere with quick head changes. On floor toms, our YESS system offers wide open sustain while keeping toms stable under the heaviest strokes.


Ball Mount & Clamp

A tribute to Yamaha design technology, the original ball mount and clamp has gone through very few modifications over the years. A large, ultra-hard resin ball sits in an attractive chromed housing, held in place with a titanium ergonomic wing bolt. It is the ultimate drummer-friendly mount, offering non-slip positioning virtually anywhere the drummer can imagine. Additionally, it permits tuning of the bottom head by simply rotating the drum.


Die-Cast Bass Drum Claws

Die-cast claw hooks with rubber insertion plates to reduce noise.


Bass Drum Leg Stopper

Bass drum legs have stoppers to make setting up easier.




Need hardware?

We recommend Yamaha's HW-780 5pc Hardware Pack

Left to right: (2) CS-755 Boom Stands, HS-740A Hi-Hat Stand, SS-740A Snare Stand, FP-7210A Kick Pedal


 One of the best values in drum sets out there - Pick up a Stage Custom today!